Click image to view full size image
MCCB Circuit Breakers Molded Case Circuit Breakers
Function
As one of the EBASEE most important products, EBS7M moulded case circuit breaker offers good performance that meets the full spectrum of application requirements, from small users to large industrial electricity distribution installation. This MCCB is characterized by high quality, reliability and performance under all conditions, simplicity of installation and safety of operation.
Innovation, technology and quality have always been the principles of guiding the development of EBS7M. The continual and constant evolution of the EBS7M has led to further extending the range of the products.
EBS7M has variety applications possibilities both in industrial and civil sectors. It can be used for motor protection, switch-disconnecting, circuit-breaking, and residual current circuit breaking, as well as specific ranges (for motor protection and switch-disconnecting) complying with the standard of IEC60947-1, IEC60947-2
Technical Parameter
| Model type | EBS7M |
|
Standard |
IEC60947 |
|
Poles |
3P, 4P |
|
Rated operational current In(A) |
Up to 800Amp |
|
Rated operational voltage Un(V) |
690V |
|
Rated Frequency (Hz) |
50Hz/60Hz |
|
Material |
PA66/PC |
|
Release type |
Thermal Magnetic |
|
Breaking capacity |
B(20kA), C(35kA), S(50kA), H(65kA), G(85kA), X(100kA) |
|
Installation |
Fixed |
Features
●Overload and short-circuit protection with adjustable threshold
●Guarantee total selectivity of the protections up to full breaking capacity for the circuit breaker installed on the load side.
●Wider application possibilities both in industrial and civil sectors.
●Be mounted in primary (power center) and secondary (panel board) distribution switchboards, for motor protection and control in generators and for the end users.
●Performances are however of particular interest where critical situations arise or where complexes plant engineering solutions are needed.
Applicable Working
| Ambient temperature | -5~+40℃, the average value cannot exceed to +35℃ within 24h |
|
Altitude |
≤2000 m |
|
Relative humidity |
≤95% |
|
Pollution level |
II. |
|
Installation location |
Place free from erosion of rain and snow |
As one of the trustworthy mccb circuit breakers molded case circuit breakers manufacturers and suppliers in China, Ebasee Electric is dedicated to be a professional cleaner energy and efficient energy developer and supplier. With professional factory supplying you with OEM, SCHNEIDER, ABB and LS mccb circuit breakers molded case circuit breakers, you can rest assured to wholesale quality products and check the pricelist with us.
Catalog:
EBS7M.pdf
E-mail: 